Mechanical Keyboard Switch Puller Remover Tool for Cherry/Kailh/Gateron Switches Replace

Product Information

Before getting started, identify the switches placed on your keyboard. Make sure that the switches are compatible with the keyboard. And also, take this opportunity to do any modification (lubing, filming, spring swap, housing swap, etc.) Remove the Keycaps Just like you did with the keycaps, set the switches aside somewhere safe, or in the box that the new switches came in. Step 3: Install the new switches But with that said, the most significant reason to remove and replace switches is experimentation. As we have mentioned earlier, there are tons of switches outside the Cherry MX series. With hot-swap keyboards, users can try out all those switches without purchasing a new keyboard.

Insert your preferred mechanical switch replacement. Ensure the pins are aligned properly. Solder the switch accordingly for keyboards that require it.Hot swappable keyboards are great, because if you’ve gotten bored or have grown unsatisfied with how your current switches feel, you can swap them out to breathe new life into an otherwise aging keyboard.

The warranty does not cover the costs of consequential damage or indirect loss or any related expense of claiming under the warranty, such as loss from inability to operate the product. Products which are developed especially for use in the country in which they are sold, e.g. due to varying transmission systems and approval demands, are not covered by this warranty if defects or malfunctions are caused by the usage of the product in another country.The two switches can easily be differentiated. Optical switches do not have metal pins underneath, unlike mechanical keyboards. Take note of these when purchasing mechanical key switches. The OEM switch puller is much more useable since it is larger and allows the user to better grip the switches. The price is pretty low, but that also means that the quality isn’t great. Fortunately, Rama Works offers a better version of this keycap puller. Steps For Removing Switches Tools Needed

Gently pull out the switch using a switch puller. For keyboards with soldered switches, desolder the switch from the circuit board first. Switch pullers may look pretty straightforward. However, choosing the right tool is incredibly important since it can speed up the whole process and prevent scratches or damages. Out of the three switch pullers that we have suggested, we recommend using the OEM switch puller and the Rama Works puller. Hot-swappable keyboards have significantly made the lives of keyboard enthusiasts a lot easier. With just a few steps, users can easily replace the switches of their keyboards without soldering and desoldering. And best of all, there are almost no downsides to these kinds of keyboards. Note that this guide is for hot swappable keyboards only. Yanking a soldered switch runs the risk of breaking the keyboard’s PCB and the switch itself.

First, unplug the keyboard from your computer, unless you want to type random garbage in while you swap the switches. Using the switch puller that came with the K70 Pro Mini as an example, press the tool down onto the key until both arms slide down the sides of the keycap and hook underneath the edges of the cap.

Consumers can still opt for the small metal puller, which is often included in the kit. that comes with their kit. However, these tend to be hard to use since they cannot properly grip the switches. The experience of using these is extremely frustrating, so we do not recommend them. The Corsair K70 Pro Mini Wireless is hot swap compatible with all 3-pin Cherry MX-style switches. It's a great place to start for getting into customizing keyboards. Step 1: Remove the keycaps If your mechanical keyboard only supports 3-pin switches, there is still a way to use 5-pin switches. However, this involves irreversibly modifying the switches by cutting off the two extra legs. We do not recommend this method and suggest preserving the switches’ original state for future builds. Best Tools for Removing Switches You don’t technically need a keycap puller, as you can lever keycaps off with a thin plastic tool, or in some cases pull them off with your fingers; however, you will need a switch puller. Switches are nigh on impossible to remove without the correct tool.You took that photo we mentioned right? Because you’re going to need it now. Using the photo that you definitely took as guidance, install the keycaps by positioning them on top of the stem of the keyswitch and firmly pressing down. You’ll feel a small amount of resistance as the keycap is pressed down onto the stem. When the key has been pressed all the way down, the keycap is on.